Treated Pine
Treated pine sizes in Melbourne
Greenhill Timbers stocks H3 LOSP treated pine in MGP10 structural grade at our yard at 170 Settlement Road, Thomastown, with pickup or delivery across Melbourne and regional Victoria. Every size below comes in 3.6, 4.2, 4.8, 5.4 and 6.0 m lengths, and we cut to length.
-
Treated Post 88×88 H4 GL CCA
From $51.55 -
Treated Post 112×112 H4 GL CCA
From $98.80 -
Treated Post 135×135 H4 GL CCA
From $139.00 -
Treated Post 185×185 H4 GL CCA
From $537.95 -
Treated Pine 70×45 MGP10 H3 LOSP
From $5.56 /piece -
Treated Pine 90×45 MGP10 H3 LOSP
From $7.43 /piece -
Lowdeck GL8 H4 138x44mm Treated Pine
$136.86 /each -
Treated Pine 140×45 MGP10 H3 LOSP
From $10.35 /piece
Treated pine sizes we stock
70 × 45 mm for battens, noggings and light framing. 90 × 45 mm for wall frames, deck joists on short spans and fence rails. 140 × 45 mm for deck joists and bearers. 190 × 45 mm for bearers, pergola beams and longer joist spans. 240 × 45 mm and 290 × 45 mm for beams and rafters. For a low deck, Lowdeck GL8 H4 in 88 × 44 and 138 × 44 mm is treated to H4 for ground contact.
What H3 and MGP10 mean
H3 is the hazard level for timber used outside, above ground and exposed to the weather: decks, pergolas, fences and external framing. It is not for timber in the ground; for posts in soil, use H4 or set them in stirrups. MGP10 is the machine-graded stress grade used for house framing, so spans can be read straight from the AS 1684 span tables. LOSP is a solvent-based treatment that leaves the pine dry, light and paintable, and cut ends should be resealed.
Going with it
Concrete stumps, Rapid Set and PRO50 concrete, galvanised joist hangers in every size above, strapnails, bugle screws and VapourSeal joist tape are all under decking accessories; posts and stirrups are under structural posts. For pre-primed pine for pergolas, fascias and verandahs, see LOSP primed pine. Call 03 9465 9875, Mon–Fri 7am–4:30pm, Sat 9am–1pm.
Building a fence? Our picket fencing page puts pickets, posts, rails, stirrups and fence finishes in one place.
Questions we get asked about treated pine
What does H3 treated pine mean?
H3 is the hazard class for timber used outside, above the ground, exposed to the weather. It covers deck frames, pergolas, fence rails and cladding battens. Timber in the ground needs H4.
How long does H3 treated pine last?
Decades above ground as long as it can dry out and is not sitting in soil or standing water. In the ground it fails early, which is what H4 posts are for. Our H3 treated pine guide covers the details.
Can I paint or stain LOSP treated pine?
Yes. LOSP treatment is paint-friendly once the timber is dry, which is why the primed LOSP range exists. Oil or paint every face and cut end.
Is treated pine safe for vegetable garden beds?
Avoid CCA-treated timber for vegetable beds. Ask us for an LOSP or non-CCA H4 option if the timber will touch soil the food grows in.