Intergrain UltraPrep Tannin & Oil Remover
- High-strength coating remover
- Prepares new timber for coating
- Low odour formula
UltraPrep Tannin & Oil Remover is a powerful liquid designed to remove old or weathered timber finishes and prepare new timber for coating. It also functions as a high-strength cleaner, effectively removing dirt, tannins, natural oils, and other surface contaminants for a clean, prepared timber surface.
Preparation
- Remove surface dirt by sweeping or washing with water.
Application Instructions
- Shake Well: Shake UltraPrep Tannin & Oil Remover thoroughly before use.
- Wet Timber: Dampen the timber surface with water before application.
- Apply Cleaner: Apply the product undiluted using a stiff bristle brush, broom, or spray. Clean entire sections to avoid patchy results.
- Caution: Treated surfaces can become slippery. Walk with care.
- Let it Work: Leave on the timber for 10–15 minutes, reapplying as needed to keep the surface damp. Avoid letting the product dry on the timber.
- Cool Application: For best results, apply to cool surfaces out of direct sunlight.
- Scrub Thoroughly: Use a stiff broom (not a wire brush) to scrub the surface vigorously.
- Rinse Completely: Rinse thoroughly using maximum pressure from a garden hose or, preferably, a high-pressure water cleaner. Incomplete rinsing may cause discolouration under clear finishes.
- Repeat if Needed: For stubborn areas, reapply and repeat the process.
- Clean with Timber Cleaner: After rinsing, use UltraPrep Timber Cleaner to restore brightness and prepare the surface.
- Dry Timber: Allow the timber to dry thoroughly before applying any coating.
Important: Ensure all UltraPrep Tannin & Oil Remover residue is removed to avoid discoloration. Follow up with UltraPrep Timber Cleaner for the best results.
