Intergrain UltraPrep Tannin & Oil Remover

Intergrain UltraPrep Tannin & Oil Remover

• High-strength coating remover
• Prepares new timber for coating
• Low odour formula

UltraPrep Tannin & Oil Remover is a powerful liquid designed to remove old or weathered timber finishes and prepare new timber for coating. It also functions as a high-strength cleaner, effectively removing dirt, tannins, natural oils, and other surface contaminants for a clean, prepared timber surface.

Preparation

• Remove surface dirt by sweeping or washing with water.

Application Instructions

1. Shake Well: Shake UltraPrep Tannin & Oil Remover thoroughly before use.
2. Wet Timber: Dampen the timber surface with water before application.
3. Apply Cleaner: Apply the product undiluted using a stiff bristle brush, broom, or spray. Clean entire sections to avoid patchy results.
   • Caution: Treated surfaces can become slippery. Walk with care.
4. Let it Work: Leave on the timber for 10–15 minutes, reapplying as needed to keep the surface damp. Avoid letting the product dry on the timber.
5. Cool Application: For best results, apply to cool surfaces out of direct sunlight.
6. Scrub Thoroughly: Use a stiff broom (not a wire brush) to scrub the surface vigorously.
7. Rinse Completely: Rinse thoroughly using maximum pressure from a garden hose or, preferably, a high-pressure water cleaner. Incomplete rinsing may cause discolouration under clear finishes.
8. Repeat if Needed: For stubborn areas, reapply and repeat the process.
9. Clean with Timber Cleaner: After rinsing, use UltraPrep Timber Cleaner to restore brightness and prepare the surface.
10. Dry Timber: Allow the timber to dry thoroughly before applying any coating.

Important: Ensure all UltraPrep Tannin & Oil Remover residue is removed to avoid discoloration. Follow up with UltraPrep Timber Cleaner for the best results.